USER GUIDE
Control Operation - Service 8
u-line.com
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE •
SERVICE
Re-Select Model
NOTICE
Before altering model selection U-Line customer
service must be notified. Failure to notify
customer service will result in voiding of the
manufacturer warranty.
After a new model number is selected, power unit must be
removed by unplugging it from the electrical outlet.
Re-Select Model allows the units model information to be
modified. Changing the units model completely
reprograms available zones, relay assignments, DC output
assignments etc.
To access Re-Select Model
1. Press to select “Re-Select Model”.
2. Press .
To alter model setting.
3. Press to select “Model=” and press . “Model” will
begin to flash.
4. Press or to scroll through each available model.
5. Press
to
confirm.
To exit Re-Select Model, to select “Return to Menu”
and press to confirm.
Fan Delay
The Fan Delay menu option allows the modification of fan
run times during and after a cooling cycle. In order to
allow time for the evaporator to properly cool, the
evaporator fan is delayed from starting with the cooling
cycle for a given amount of time. In order to remove as
much warmth as possible from the cabinet the evaporator
fan will continue to run at the end of the cooling cycle for
a given amount of time.
Fan Delay On=
“Fan Delay On” is the amount of time in minutes the fan
will be delayed from starting from the beginning of a
cooling cycle.
Fan Delay Off=
“Fan Delay Off” is the amount of time in minutes the fan
will continue to run at the end of a cooling cycle.
To access Fan Delay
1. Press to select “Fan Delay”.
2. Press .
To alter fan settings.
3. Press to select either “Fan Delay On” or “Fan Delay
Off” and press . The chosen option will begin to
flash.
4. Press or to change settings.
5. Press
to
confirm.
Up
Select
Down
RETURN TO MENU
RE-SELECT MODEL #
3018R
Up
Select
Down
RETURN TO MENU
FAN DELAY
FAN DELAY ON = 1
FAN DELAY OFF = 2
