![background image](http://html1.mh-extra.com/html/u-line/2115wcol/2115wcol_installation-manual_830478009.webp)
06/2006
9
www.U-LineService.com
2115WC/2115WCOL Wine Captain
®
Overlay Frame
(2115WCOL Units Only)
Frame Preparation
An overlay frame covers the door frame to give a built-in
appearance. Appropriate hardware and a copy of these
instructions will be included in the unit.
IMPORTANT
The thickness of the wood overlay frame must be 3/4".
The door frame must not weigh more than 20 lbs.
1. Create an overlay frame to the dimensions shown in
Figure 13
.
IMPORTANT
Rear View of wood frame for right-hand hinge shown.
Use mirror image for left-hand hinges.
2. Typical routing dimensions
are shown in
Figure 14
.
3. Create a relief for pivot plate by cutting notch in top
corner and coinciding back corner of overlay frame.
Refer to
Figure 15
for exact specifications.
Route notch in top corner of overlay frame as shown (see
Top and Side Views). Top of notch is entire depth of
frame, front to back.
Width: 13/16"
Depth: 1/8"
Route notch in backside of top corner of overlay frame
(see Back and Side Views).
Width: 13/16"
Depth: 1/8"
27-3/4" 30"
12-1/2"
14-3/4"
Rear View
of
Wood Frame
1/8"
13/16"
1/8"
Relief Notch
for Pivot Plate
(Right Hand Hinge Shown)
3/4"
Figure 13
2-1/4"
1-13/16"
1-1/8"
11/16"
(Ref.)
7/16"
(Ref.)
5/32"
3/4"
3/8"
Figure 14
Top View
Back View
Bottom View
Side View
13/16"
1-17/32"
13/16"
13/32"
3/8"
Door Bottom:
5/16" Dia. x 1/4" Deep
Chamfer 1/32" x 45
°
3/8"
1/8"
1/8"
13/16"
7/16"
1/8"
13/32"
3/4"
13/32"
0.177" Dia. (#16 Drill)
x 11/16" Deep
5/16" Dia.
x 1/2" Deep
1/32" R
1/8" R
Figure 15