5
FIGURE 4 – ATTACHING THE OVERLAY PANEL
a. Tap nylon inserts into the two holes drilled in the wood panel.
Use two #6 screws (P/N 42122) to attach top pivot bracket
(P/N 12029) to the wood door panel (Figure 4).
Figure 4
b. If required, attach optional cabinet handle hardware to the
wood door panel at this time. If an optional cabinet handle is
installed, make sure the mounting screw heads are below the
back surface of the overlay.
TYPICAL WOOD PANEL
TOP PIVOT PLATE
#6 X 5/8" FLAT HEAD SCREW
TWO REQUIRED
8MM PLUG INSERT
TWO REQUIRED
