U-Fairy G.R. IOT Tech GR-309N Скачать руководство пользователя страница 8

COMMAND_CLASS_BATTERY Report 
COMMAND_CLASS_BASIC  Set 
COMMAND_CLASS_NOTIFICATION  Report 
COMMAND_CLASS_DEVICE_RESET_LOCALLY Notification 

Device Reset 
Press the button 6 times the device will send the reset notification to the list 
node in the group 1 and erases the device memory, when the light flash is 

resetting success. 
Use this procedure only in the event that the network primary controller is 
missing or otherwise inoperable.

 

Command Class support 

Device Type: Sensor Notification 
Device Role Type: Reporting Sleeping Slave(RSS) 

COMMAND_CLASS_ZWAVEPLUS_INFO 
COMMAND_CLASS_VERSION 
COMMAND_CLASS_MANUFACTURE_SPECIFIC 
COMMAND_CLASS_DEVICE_RESET_LOCALLY 

COMMAND_CLASS_POWERLEVEL 
COMMAND_CLASS_BATTERY 
COMMAND_CLASS_ALARM 
COMMAND_CLASS_ASSOCIATION 
COMMAND_CLASS_ASSOCIATION_GRP_INFO 
COMMAND_CLASS_WAKE_UP 

Notification Explanation 

Notification type: Burglar (0x07) 
Event: 0x00 is normal status, 0x02 is trigger 
The Tampering Event is not used on this device. 

Battery low warning 
When used the 2xAAA battery that is low than 2.5V the door sensor will send 
the battery low warning 0xFF to the list node in the group 1.

 

Содержание GR-309N












Отзывы: