This product can be included and operated in any Z-Wave
network with other Z-Wave certified devices from other
manufacturers and/or other applications. All non-battery operated
nodes within the network will act as repeaters regardless of
vendor to increase reliability of the network.
Product Specification
Installation Method: Magnetron
Working Voltage 2xAAA
Working Current: <35mA (When it is triggered )
Sleeping Current:
≤
5uA
Working Temperature -10
℃
~ +50
℃
Operating Humidity
≤
80%
Communication Technology Z-Wave plus
Communication Frequency 868.42MHz
Transmission Speed 9.6/40/100 kbps
Transmission Distance outdoor 40M
Operating Principle
The Door sensor adopt design which will save the power. When the
door is close, it does not transmit radio signals. And the power
consumption of only a few microamps. At once the door is open, it will
launch a wireless alarm signal in about 1 second immediately , then
stop itself. The door sensor won’t send any signal even the door is
opened . This is to prevent the battery not to run out and keep running
if the transmitter sending the information continuously .
The door sensor detector is usually installed on the inside of the door. it
consists of two parts. One is the small component with permanent
magnet with a permanent magnet inside .It is used to produce a
Содержание GR-309N
Страница 1: ...GR SMART HOME Door Window sensor GR 309N ...
Страница 5: ... Picture Two Picture One ...
