5)
Place the lid on a flat surface; you will see the
empty middle part, which ends up in the water
tank, where water and the U-Ox should be placed;
5a)
Remove the 2 pieces of tape from the water-
plate grid; these tapes are to prevent any damage
to the grid during transport;
5b)
Remove the BioStack filter from the tank;
5c)
Remove the protections from the bottom of the
BioStack filter (these protections prevent damage
to the pump during transport);
5d)
Replace the BioStack filter in the tank;
6)
Add water to the center of the BioStack until it
reaches the maximum level indicated on the metal
plate. Water should be poured through clean con-
tainers used only for water, not previously used to
hold other substances such as household or per-
sonal cleaners, chemicals or food;
5.
6.
5a.
5b.
5c.
5d.
07
Содержание AIRcel70
Страница 1: ...AIRcel70 INSTRUCTIONS FOR USE ...
