AIRcel70 should only be operated with tap water
and U-Ox (natural enzymes).
Note:
You will get the best air purification results by
ensuring continuous 24/7 operation of the AIRcel70
and a regular supply of U-Ox.
AIRcel70 is designed to work non-stop 24/7 and
this is the intended mode of operation.
9. Components
•Air exhaust.
•Lid / cap.
•Water level sensor.
•Fan.
•BioStack
TM
- Biological filter.
•Pump.
•Tub / tank.
10. What's in the box:
1)
AIRcel70 unit
2)
12V dc power cable (input voltage
100-240 Volt approx, frequency 50-60 Hz)
3)
Pure Air Zone adhesive
4)
Instructions for use
11. Using the AIRcel70
11.1. Installation
To proceed with the installation of AIRcel70 follow
the procedure described below:
1)
Installation operations must take place with no
power supply;
2)
Remove the AIRcel70 from the box and store it
in a suitable place or where indicated by your Air
Quality Specialist;
3)
Lift the cover and place it next to the tank;
4)
Disconnect the cable by unscrewing the connector.
Do not pull on the connector;
06
3.
4.
Air exhaust
Water level
sensor
BioStack
TM
-
Biological filter
Fan
Tub /
tank
Pump
Lid / cap
1
2
3
4
SCAN ME
Содержание AIRcel70
Страница 1: ...AIRcel70 INSTRUCTIONS FOR USE ...