u-blox ZED-F9P Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 110

background image

ZED-F9P - Integration manual

3 Receiver functionality

This section describes the ZED-F9P operational features and their conﬁguration.

3.1 Receiver conﬁguration

The  ZED-F9P  is  fully  conﬁgurable  with  UBX  conﬁguration  interface  keys.  The  conﬁguration
database  in  the  receiver's  RAM  holds  the  current  conﬁguration,  which  is  used  by  the  receiver
at  run-time.  It  is  constructed  on  start-up  of  the  receiver  from  several  sources  of  conﬁguration.
The  conﬁguration  interface  and  the  available  keys  are  described  fully  in  the  ZED-F9P  Interface
description [

].

A conﬁguration setting stored in RAM remains eﬀective until power-down or reset. If stored in
BBR (battery backed RAM), the setting will be used as long as the backup battery supply remains.
Conﬁguration settings can be saved permanently in ﬂash memory.

The conﬁguration interface has changed from earlier u-blox positioning receivers. There
is some backwards compatibility, however, users are strongly advised to adopt the
conﬁguration interface described in this document. See legacy UBX-CFG message ﬁelds
reference section in the ZED-F9P Interface description [

].

Conﬁguration interface settings are held in a database consisting of separate conﬁguration items.
An item is made up of a pair consisting of a key ID and a value. Related items are grouped together
and identiﬁed under a common group name: CFG-GROUP-*; a convention used in u-center and
within this document. Within u-center, a conﬁguration group is identiﬁed as "Group name" and the
conﬁguration item is identiﬁed as the "item name" under the "Generation 9 Conﬁguration View" -
"Advanced Conﬁguration" view.

The UBX messages available to change or poll the conﬁgurations are the UBX-CFG-VALSET, UBX-
CFG-VALGET, and UBX-CFG-VALDEL messages. For more information about these messages and
the conﬁguration keys see the conﬁguration interface section in the ZED-F9P Interface description
[

].

3.1.1 Changing the receiver conﬁguration

All conﬁguration messages, including legacy UBX-CFG messages, will result in a UBX-ACK-ACK
or UBX-ACK-NAK response. If several conﬁguration messages are sent without waiting for this
response then the receiver may pause processing of input messages until processing of a previous
conﬁguration message has been completed. When this happens a warning message "wait for cfg
ACK" will be sent to the host.

3.1.2 Default GNSS conﬁguration

The ZED-F9P default GNSS conﬁguration is set as follows:

• GPS: L1C/A, L2C
• GLONASS: L1OF, L2OF
• Galileo: E1B/C, E5b
• BeiDou: B1I, B2I
• QZSS: L1C/A, L2C
• SBAS: L1C/A

UBX-18010802 - R08

3 Receiver functionality

Page 11 of 110

Early production information

«
...
9
10
11
12
13
...
»

Содержание ZED-F9P















































































































Отзывы:

Нет отзывов

Похожие инструкции для ZED-F9P

Бренд: Lawler Страницы: 4

Бренд: Barco Страницы: 6

Бренд: Yudian Страницы: 26

Бренд: Gardena Страницы: 14

Бренд: Gardena Страницы: 8

Бренд: Quectel Страницы: 95

Бренд: ICAS Страницы: 51

Бренд: Icar Страницы: 40

Бренд: Icar Страницы: 86

Бренд: Icar Страницы: 39

Бренд: IBP Страницы: 12

Бренд: L. G. B. Страницы: 2

Бренд: L-Acoustics Страницы: 36

Grafica DNE-K07

Бренд: Paradox Страницы: 24

Бренд: Panosol Страницы: 105

Бренд: Pangolin Страницы: 8

Бренд: Balboa Страницы: 74

Бренд: Cadac Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды