u-blox XPLR-AOA-3, Руководство пользователя

Страница: 22 / 44

UBX-22006906 - R03 Page 22 of 44
C1-Public
The powering options are controlled with jumper J2, as shown in Figure 19 .
Figure 19: Jumper J2 powering options
J2 jumper settings are described in Table 3 .
Jumper position Pins Power setting
P 1 – 2 Power over Ethernet or barrel jack. When the barrel jack is present and
connected to a voltage source, the device automatically gives priority to
that, even if a PoE switch is also connected to the ethernet plug.
N 3 – 4 USB connector J15 (USB interface of the ANT-B10).
F 5 – 6 USB connector J13 (USB connector of the FTDI chip for UART connection
to the processors on EVB-ANT-1 or the antenna board).
Table 3 Jumper J2 settings
4.8 Mechanical specifications
EVB-ANT-1 Dimensions: 126.09 mm x 126.09 mm.
EVB-ANT-1 has four mounting holes that match the four corner holes on the ANT-Bxx antenna board
for screw mounting.
Figure 20: EVB-ANT-1 mechanical dimensions