TZ-AVL201 User Guide
V1.0
.2
May5
2014
14
alarm message.
Y=0, Disable GEO-fence alarm.
Y=1, Into GEO-fence alarm.
Y=2, Out of GEO-fence alarm.
Turns on Geo-fencing alarm. When the
tracker
moves
in/out
the
preset
scope,it will send an GPRS alarm to the
server.
Note:
Make sure the position of north
latitude and east longitude set it
(+),otherwise set it (-)
AABB.BBBB
6
Set APN,Username,Password
*
$$$$$$,
011,APN,Username,Pass
word#
APN : APN string (must < 28 chars)
User name: Your username (must
<
28 chars)
Password: Your password (must
<
28 chars)
* If haven't username or password,
then left it blank.
For example:
*000000,011,CMNET,,##
(It
haven't
username and password)
7
Set IP Address & port number
*
$$$$$$
,015,0,IP(DN),PORT#
IP :
xxx.xxx.xxx.xxx or
DN: Domain Name
PORT : [1,65535]
8
Set the time intervals of GPRS
Data
*
$$$$$$
,018,X,Y#
X (3 Digital)
=0 stop send time interval GPRS
=[10,999] Time interval (UnSit: sec)
Y (3 Digital)
=0, stop send time interval GPRS
= [1,999] After send YYY times stop.
=999, continue send GPRS un-stop
9
Set the GPRS mode
*
$$$$$
$,019,X#
X=0, Use the UDP mode
X=1, Use the TCP mode
10
Enable/Disable I/O port
*
$$$$$$
,025,A,Y#
Y=0,Out port A is high (the circuit will
restore)
Y=1,Out port A is low (the circuit will
be cut off)
eg: *000000,025,A,1#
Circuit to port 5 will be cut off
10
Reading the IMEI number
*
$$$$$$
,801#
This command to ask AVL201reply the
IMEI number and the firmware of
