Tytan DS 512, Руководство по установке

Страница: 11 / 21

Digital Systems
11
5. PROGRAMMING OF TYTAN REMOTE TRANSMITTERS
The DS512 can be equipped with additional RF receiver module, handling the Tytan remote
transmitters.
The RF module is automatically paired with DS512:
- when the DS512 is restarted. Please keep in mind, that to restart DS512 all power supply
sources must be disconnected: the main power supply, internal battery and USB connector.
- when the
RF module button is pressed on the dedicated PC software and the RF receiver
diagnostic monitor is opened.
In order to program the remote transmitters, open the
RF module panel
and press the Save remote transmitters button.
Now press simultaneously Lock and Unlock buttons on remote
transmitter or button on Joker token. The lamp lights up for a second.
The remote transmitter / Joker is programmed.
Then press the buttons/button on next remote. When the last remote is
programmed, press the
End of programming button. The popup with
number of remotes programmed will be displayed.
6. INSTALLATION OF GPS RECEIVER
The DS512 can be equipped with external GPS receiver integrated with GPS antenna.
Correct installation of GPS receiver is crucial for the precision of localisation and
is determined by some contradictory condition.
Due to security reasons, the receiver should be installed in a hidden place.
The GPS receiver cannot be covered with metal objects and should
‘see’ as much sky
as possible. The recommended installation place is the area directly under the dashboard,
close to the windshield in the central part of the dashboard.
Sometimes, in the vehicles with glass covered by thin metalized layer, there is a need
to install the GPS receiver outside the cabin.
The GPS antenna installation should be verified at the device start-up procedure with
diagnostic monitor described above.
IMPORTANT! The time necessary to fix correct GPS position can reach up to few tens
of seconds.
IMPORTANT! The GPS receiver is not waterproof!
7. PREPARATION OF SIM CARD
The DS512 can work in any GSM 900/1800 network, both with pre-paid and regular SIM
cards. SIM card PIN code must be disabled (recommended solution) or must be set to 6789.
If the pre-paid card is used, please consider the validity period of the pre-paid SIM card and
inform the user about necessity of pre-loading the card account in order to continue
operation of the SMS functionality of the device.
Please note the mobile phone number of the SIM card inserted in the device would
be required for SMS commands.