TYT TH-7800, Руководство пользователя

Страница: 5 / 28

Transceiver
03
Initial Installation
Mobile Installation
To install the transceiver select a safe and convenient location inside your vehicle that minimizes danger to your passen-
gers and yourself while the vehicle is in motion. Consider installing the unit at an appropriate position so that knees or legs
will not strike it during sudden braking of your vehicle. Try to pick a well ventilated location that is shielded from direct su-
nlight.
Installation methods
1 – Single Body Installation
The supplied mounting bracket can be used
for the main unit installation.
Front panel
Main body
2 – Remote Control Installation
The supplied remote controller mounting bracket
and separation cable can be used for installation.
Separation cable connection
A separation cable (4.5m; 14.8 ft) is supplied with the TH-7800.
Connect the controller and the main unit using with the separation cable as follows.
Main unit
04
Mounting bracket installation
1. Drill 4 holes where the mounting bracket is to be installed.
2. Insert the supplied screws, nuts and washers through the mounting bracket and tighten.
3. Adjust the angle for your suitable position.
Controller
B
A
LOW
V/M
C
HM
SCN LOW V/M
SCN
HM
D
E
F
SQL
VOL
RPT TONE
SUB
MHz
SQL
VOL
25
*
B
A
LOW
V/M
C
HM
SCN
LOW
V/M SCN HM
D
E
F
MHz
RPT TONE SUB