6. Scan Modes
Batch Mode (default):
Scanner transmits scanned barcode data right after scanning barcode label to receiver.
When the Bluetooth radio link breaks or the communication quality is poor, the scanner stores scanned
barcode data right after scanning. The stored data will be transmitted to receiver right after trigger pushed
whenever the communication between scanner and receiver rebuild or communication quality is at good
state. Scanner doesn't allow any barcode reading attempts while the stored data is being transmitted to
receiver.
On-line Mode:
Data is transmitted immediately over an active Bluetooth connection.
When a Bluetooth connection is not available, the scan light is not emitted.
Recapture Mode:
Data is transmitted immediately over an active Bluetooth connection, while all barcode
scans are stored in the device. To transfer stored data, scan the Transmit barcode. Purge stored data using
the configuration utility.
Note:
There is no feedback protocol between host computer and receiver no matter what which interface
equipped. The radio link between the scanner and the receiver can work well as long as stable power
continuously supply for both of them. Most computers p5V DC power from keyboard port or USB
port even they are at power off state. So it might be a risk to loss the scanned data when operator works in the
field while host computer acts abnormally such as hang-up, power off, etc. This mode provides the last chance
to trace back the data.
Barcode attachment:
To read the barcode to transmit data in the scanner's memory to PC.
Recapture Mode
5
Содержание BT-3800-K
Страница 1: ...User s Manual Bluetooth Scanners BT Series...