Tysso BT-3800-K, Руководство пользователя, Страница: 10 / 10

8
9. Audible & Visual Indicators and Operation
Audible indicators
5-Ascending/Descending tone beep
Signifies activation/deactivation of the Bluetooth connection. Hold the trigger for 5+ seconds to
toggle this setting.
1 beep + 1 beep
Indicates successful read and transmission to the receiver
1 beep + 3 beep
Indicates successful read, but failed transmission to the receiver. The data is stored on the scanner.
2 beeps before the scanner emits light
Indicates the battery power is low. From this point, the scanner has power for approximately 250
scans.
1 beep + 1 beep + 2 beeps
Indicates barcode was read and stored successfully, but the scanner’s memory is nearly full.
1 beep + 3 beeps + 2 beeps
Indicates barcode was read successfully, but transmission failed and the barcode will be stored on
the scanner. The scanner’s memory is nearly full.
10 tone beeps
The scanner has been programmed successfully 6 tone beeps
The scanner’s memory has been purged.
Visual Indicators
Scanner
Flashing Red LED: Establishing connection to Receiver
Solid Red LED: Connected to Receiver
When plugged in:
Flashing Green LED: Battery is in charging mode
Solid Green LED: Battery is fully charged
When scanning:
Green LED Flash: Successful scan
Green LED Flash w/ no scanner light: Scanner’s memory is full
USB Device
Flashing Red LED: Device is not connected to scanner
Solid Red LED: Device is connected to scanner