Important Information
Before Testing
˙
Always keep test strips in the original vial. The vial contains drying agents to protect the test strips from moisture.
˙
Tightly close the vial cap immediately after removing a test strip.
˙
Use each strip immediately after removing it from the vial.
˙
Use each test strip ONCE ONLY.
˙
Do not use the test strips or Control Solution beyond the expiration date printed on the package. This may cause
inaccurate results.
˙
Do not use the test strips or Control Solution if the package is damaged.
˙
Store your test strips and the Control Solutions between 39°F ~ 86°F (4°C ~ 30°C)
Temperature beyond this range can damage test strips and lead to inaccurate results.
˙
Any change of medications based on the Tyson Bio HS100-B Blood Glucose Monitoring System results without
advices of a doctor is NOT RECOMMENDED.
˙
The lancing device is intended only for single user and should NOT be shared.
˙
Users should wash hands thoroughly with soap and water after handing the meter, lancing device, or test strips.
˙
Only Tyson Bio HS100-B Blood Glucose Test Strip and Control Solution can be used with the Tyson Bio HS100-B Blood
Glucose Meter.
˙
For accurate results, testing must be done within the operating temperature range (50°F ~ 104°F/10°C ~ 40°C).
If the meter is moved to an area appropriate conditions from where is out of operating temperature range, place
the meter for 30 minutes before conducting the testing.
13
