TYROLIT
Hydrostress AG
Page 23
Wall saw WSE811
Frequency change of the remote controller
Frequency search
The radio remote controller systems are equipped with a frequency generator for selecting a
frequency.
If the systems are malfunctioning or the radio connection is interrupted (external transmitter,
range, rechargeable battery empty), the system immediately goes into the EMERGENCY STOP
state.
New frequency search:
The next frequency is selected by switching the start switch on the remote controller off and
then on again.
The process of switching off and on is limited to four attempts (channels). If the system does
not find a suitable frequency after four attempts, then a changeover to cable operation is
necessary.
4.3
