TYROLIT Hydrostress TBE400, Руководство по эксплуатации

Страница: 18 / 31

18
TROUBLESHOOTING
Problem Possible cause Solution
Saw blade is blunt
-
Saw blade type is
unsuitable for the
meterial being cut
-
Saw blade type is
unsuitable for the
machine performance
-
Saw blade too hard
Use appropriate type of saw blade
Diamond segments are
blunt
Sharpen the diamond saw blade
Appearance of cut is
not optimal
Poor tension in the blade
material
Return the saw blade to the
manufacturer
Too much load placed on
the saw blade
Use a suitable saw blade
Diamond segments are
blunt
Sharpen the saw blade
The center hole in the
saw blade has become
wider due to wear
The saw blade has slipped
on the motor shaft when
running
The arbor otr the saw blade must be
fitted with an appropriate adapter ring
Check the receiving flange and have it
replaced if necessary
Saw blade shows
blooming colors
Lateral friction when cutting The material feed is too high; proceed
more slowly
Grinding marks on the
saw blade
Material is not being feed
parallel to the saw blade
Ensure that the direction of feed is
absolutley parallel to the saw blade
Adjust the roller table/have it adjusted
Poor tension in the blade
material
Have the saw blade tensioned
Too much load on the saw
blade
The material feed is too high, proseed
more slowly