TYROLIT
Hydrostress AG
Page 7
Ring saw HRG500
Safety clothing
Safety clothing
Residual risks
Risk of serious injuries from the residual risks described in the chapters that follow.
Sharp edges
Risk of serious lacerations if the tool is touched.
X
Do not touch the tool during operation
X
Always wear gloves when handling the stationary tool.
Diamond segments flying off
X
Before use, always ensure that the ring guard is correctly fitted and undamaged.
X
Do not start sawing if any other persons are in the danger zone.
X
Ensure that a safety distance of 15 m is maintained from the ring saw.
X
Replace the disk grinding ring if diamond segments start to break off.
Recoil
Erroneous positioning of the disk grinding ring or cutting the wrong materials can make the
ring saw recoil and seriously injure the operator.
X
Only cut materials that are permitted within the scope of the correct purpose of use.
X
Do not apply disk grinding ring above the middle of a workpiece edge.
Unintentional start-up
X
Before starting up, please ensure that:
–
The control handle with lock is working correctly.
–
There are no other persons in the danger zone.
Vibration
Vibration can cause circulation problems and/or nerve damage.
Consult a doctor in the event of symptoms.
2.7
2.8
2.8.1
2.8.2
2.8.3
2.8.4
2.8.5
