TYROLIT
Hydrostress AG
Page 4
Ring saw HRG500
Safety instructions
Please pay attention to the safety instructions
Do not work with the unit unless you have read and understood the safety instructions.
The unit has been inspected before being shipped and is delivered in perfect condition.
TYROLIT Hydrostress does not accept liability for damage caused by failing to follow these
instructions. This applies in particular to the following damage:
•
Damage caused by improper use and operator error
•
Damage caused by failure to observe the safety-related information in these instructions or
the warning signs on the unit.
•
Damage caused by substandard maintenance work
Use for correct purpose
The ring saw is used by trained personnel for cutting concrete, masonry and stone.
Incorrect use:
•
Working without protective equipment or inadequate protective equipment
•
Cutting other materials
•
Removal of protective devices
•
Cutting in potentially explosive areas
•
Cutting loose parts
•
Incorrect or absence of waste water disposal (sawing sludge)
Target groups and responsibility
Authorised personnel
Work on or with machines or systems from TYROLIT Hydrostress may only be carried out by
authorised persons. Personnel are considered to be authorised if they meet the necessary
training and know-how requirements and they have been assigned an exact functional role.
Manufacturer
The following are considered to be manufacturers of products that are supplied by TYROLIT
Hydrostress:
•
TYROLIT Hydrostress
•
A company explicitly nominated by TYROLIT Hydrostress
Within the context of an integrated quality assurance and safety control system, the manufac-
turer is entitled to request from the operator information about the products.
Operator
The operator named by TYROLIT Hydrostress is the primary, legal entity responsible for the cor-
rect use of the product and for the training and assignment of the authorised personnel. The
operator sets out the skills and level of training of the authorised personnel.
Personnel qualifications
•
A technical trained person in a management position.
•
Relevant experience in personnel management and risk assessment
•
Has read and understood the safety instructions
2
2.1
2.2
2.3
2.3.1
2.3.2
2.3.3
