TYROLIT Hydrostress AG
Floor Saw FSD1049
Page 19
6.11
Gear selection procedure for 3-speed gearbox
DANGER
Failure to follow instructions can result in death or serious injury.
The gear can only be changed if the motor is stationary. Never tamper with the gear selection
mechanism with the motor running.
6.11.1
Gear selection procedure
INFORMATION
No tools are required for the entire selection procedure.
1.
Stop the motor.
2.
Open the motor cover.
3.
Push the gear selection lever (1) upwards and release the locking mechanism (2).
4.
Slide the gear selection lever to the desired gear position.
Gear position (designations)
M = Medium
►
Medium speed
L = Low
►
Low speed
N = Neutral
►
No gear engaged
H = High
►
High speed
5.
Push the gear selection lever (1) into the recess for the required gear position.
6.
Secure the gear position using the locking element (2).