Tyre ?are T802C, Инструкция по эксплуатации

Страница: 3 / 16

1. Cautions
1.1 Safety cautions
Before installing this product, please read the cautions below.
1. The monitor should be installed inside the vehicle where it does not affect normal
driving.
2. The monitor should be fixed in such a way that it does not fall off while you are
driving.
3. After the sensor has been installed, check if there is any air leakage. If necessary,
smear the tyre valve with soapy water to check whether there is air leakage.
4. Be careful: tyre blowout can be caused by high pressure and fuel consumption can
be affected by by low pressure.
5. This product can effectively monitor the tyre pressure and temperature in real
time, but cannot prevent traffic accidents, so it's also important to choose high
quality tyres and ensure normal tyre pressure when using this product.
6. Pay attention to the traffic when checking the tyre pressure and temperature while
driving.
1.2 Installation cautions
1. The sensor and receiver are wirelessly connected over a long distance. A number of
anti-jamming functions ensure that the receiver still effectively receive the data
when used with a long vehicle .
2. Due to expansion and contraction of the air in the tyre, it is normal for the tyre
pressure to fluctuate while driving.
3. It is normal for a tyre to have some air leakage, with no direct relation to the
installation of this product.

It is recommend that you install the monitor and power it up before installing the
sensor.
 The four default sensors have already been matched with the monitor in the
factory. There is no need to match the sensors again.
1