Tyre ?are T802C, Инструкция по эксплуатации

Страница: 11 / 16

Parameter settings
Fig 5-2-2
5. The monitor displays ON, showing that the tyre was matched successfully
6. Press and hold
to save and exit
6. Tyre interchange setting (use when wheel positions are changed)
Enter into parameter setting mode, press + or - to select tyre exchange setting
(Figure 5- 3- 1), then press the selection button to change the tyre (Figure 5-3-2). Press
the selection button to select the desired tyre and press + or - to change the tyre
position (Figure 5-3-3). For example, if the left front tyre and the right front tyre need to
be exchanged, exchange tyre 01 and tyre 02 (Figure 5-3-4), then press the selection
button to exit. Hold {the selection button for 3 seconds to save the setting and exit
setting mode.
The numbers represent the position of tyre:
01: left front tyre
02: Right front tyre
03 Left rear tyre 04: Right rear tyre
Fig 5-3-1
1. Enter into parameter setting mode, press the selection button to change the setting.
Fig 5-3-2
2. Press the selection button to select the tyre to be exchanged.
9