22
8.4 Motor encoder
Turn the hand wheel by hand equably, display the encode count and hall
signal of motor, range is 0~7. If the fault state appeared, then display “ERRO”.
Display code
Descriptions
QEI:
The encode count of motor.
Hall:
The hall’s range is 0~7, If the fault state appeared, then
display E.
8.5 Solenoid
Use
and
to select solenoid, use
for test.
8.6 Identifier
Display the code of identifier and machine type.
8.7 Software ver.
8.8 Panel ver.
8.9 Other device
8.10 PCB ver.
8.11 Power voltage
Display code
Descriptions
AC:
The AC input voltage.
DC:
The DC bus voltage.
8.12 Other voltage
Display code
Descriptions
M:
The main control voltage.
Sol:
The solenoid control voltage.
8.13 Phase current
Display code
Descriptions
