TypeS PROJUMP 14000S, Руководство пользователя

Страница: 23 / 32

EN
21
Jump starting
Red
Black
1. Press the to power on the PROJUMP; ensure the power level is 50% or higher.
2. Insert the GRAY end of the Jumper Cables into the Jumper Cables Port. The LCD Display
will read: First clamp + then - cable to the posts
BEFORE YOU JUMP START!
Before you attempt to jump start your vehicle, ensure your vehicle is in
Park. Unplug all USB charging cables. Ensure manual transmission
vehicles are in Neutral with the Emergency Brake engaged.
The Cable Clamps are color-coded, RED for
POSITIVE (+) and BLACK for NEGATIVE (-). DO NOT mix up the
cables or allow the metal ends to touch together because this may
damage the battery, charging system and/or electronics on a vehicle.
Locate the vehicle battery and follow the steps below. We recommend jump starting when the PROJUMP battery level is > 50%.
INTELLI-STEP SMART DISPLAY:
The PROJUMP is programmed to display step-by-step instructions to Jump Start your vehicle. When the PROJUMP
is powered on, plug the Jumper Cables into the Jumper Cables Port and follow the progressive prompts on the LCD
Display. The detailed steps are provided in the next section for reference.
Red
Black
80%
Ready, Start vehicle
ignition.
80%
Successful Jump,
unplug cables.
80%
Clamp cables to
battery.
80%
80%
First clamp + then -
cable to the posts