POWER
Two Power options available
12V Plug-in power adapter
12V Hardwire
3A fuse
1) Select your desired power connection
and connect to the Plug & Glow
TM
Smart
Lighting Hub Controller
2) Connect LED strip with extension cable
to the Smart Lighting Hub Controller.
Use arrow indication to match the
correct direction.
Note the
portion of
strip that is
cut-off is
no longer
usable.
bb
ON/OFF
a
Light will ONLY work when
power arrows are aligned
as shown above
LED Strips
Extension
Cables
Smart Lighting
Hub Controller
APP INSTALLATION
• Install Smart Lighting APP on your Smart
phone. Scan above QR code to find the
compatible APP for iOS or Android.
• Or you can search for the APP through
the APP Store or Google Play by:
• Once installed, open the
APP and begin enjoying
your Plug & Glow™
experience.
bb
b
a
Scan to download APP
Compatible with iPhone 4s &
higher, iPad3, iPad Mini, iPad Air
& higher, and iPod touch 5th
Generation & higher.
Requires iOS 7.0 or higher.
Compatible with phones
with Android™ 4.3 or higher.
Note: not all Android™ phones
are equipped with Bluetooth®
Smart v4.0 required for
this application.
Scan to download APP
WINPLUS TYPE S LED
+
-
• Choose your desired location.
( – see suggestions above)
• Clean surface thoroughly with
isopropyl alcohol. Dry completely.
• Peel off the 3M™ tape backer and
carefully apply to the desired area.
Note:
• For use with 12V power only
• Suitable temperature for
installation is 70°F (21°C) or above.
• If needed LED strips can be cut – ONLY
cut where scissors mark is shown.
