19
BACKUP CAMERA POWER, MODES & LED INDICATORS
Power / Mode Status
LED Indicators
Power On
Press and hold Power button for 1 second, Camera will power on.
Blue LED light flashes 2 times when Camera is powered on.
Power Off
Press and hold Power button for 2 seconds and release, Camera will power
off.
Red LED light flashes 1 time when the Camera is powered off.
Pairing Mode
To begin Pairing Mode, press the Power button on Camera until blue
LED light flashes quickly. Now Camera is in Pairing Mode.
Blue LED light flashes quickly for 1 minute or until pairing success is complete.
Low Battery Power Off
Camera will power off when the battery is used up.
Red LED light flashes to indicate low battery.
USB Charging
This LED light is next to the MicroUSB port.
While charging, the Red LED light will remain solid. When Camera is fully charged,
Red LED light turns off.
TOUCH PANEL MIRROR MONITOR POWER, MODES & LED INDICATORS
Low Battery Power Off
Monitor will power off when the battery is used up.
Red LED light flashes to indicate low battery.
Charging
Monitor is charged by the DC 12V/24V Power Source.
While charging, the Red LED light will remain solid. When Monitor is fully charged,
Red LED light turns off.
TOUCH PANEL MIRROR MONITOR INDICATOR
If you see this message on the
Monitor, that means the battery
of the Solar Powered Wireless
Backup Camera is lower than
working voltage. Please fully
charge the camera.
ADJUST CAMERA VIEW
Swipe up and down to adjust view.
NOTE: You cannot adjust the parking aid line
and camera view in the split screen mode.