TYM T254NC Скачать руководство пользователя

Страница: 13 / 92

►

DESCRIPTION

■

General Construction

The transmission case, engine and front axle support are bolted together to form a rigid unit.

■

Front Axle & Wheels

The 4WD front axle is a center-pivot, reverse Eliot type.

The front wheel drive mechanism is incorporated as a part of the axle.

The drive power of the front wheels is taken from the rear transmission and transmitted to the

differential in the front axle where the power is divided into right and left and to the respective final

cases.

In the final cases, the transmitted revolution is reduced by the level gears to drive the front wheels.

The 4WD mechanism with level gears provides wider steering and greater durability.

■

Engine

The tractors are fitted with fuel efficient engines with 3 cylinders manufactured by Yanmar.

■

Clutch and Transmission

A single plate dry clutch is used on these tractors.

Tractors with IPTO(Independent Power Take Off) are fitted with hydraulic clutch assy.

The transmission Gear box has six forward speed & two reverse speeds with a high-low select lever.

Presently, TYM tractors are fitted with sliding gear and constant mesh type gears.

■

Brakes

TYM tractors are provided with disc brakes operated by a foot pedal.

A parking brake lever is fitted for parking.

■

Rear axle & Wheels

This is mounted on ball bearings and is enclosed in removable housing which are bolted to the

transmission case.

The rim & disc, fitted with rear tires are bolted to the outer flange of the rear axle.

■

Hydraulic System & Linkages

TYM Tractors are fitted with live (i.e. system is in operation) independent systems.

Three point Linkages can be used for category 1(N) type of implements.

■

Steering

Steering consists of a Hydrostatic Power Steering system, which has a hydraulic cylinder and a single
type hydraulic pump

■

Electrical System

A 12 volt battery is used to activate the engine through the starter motor and the electrical system

comprising the horn, head lamp, turn signal lamp, tacho-meter, hour meter, brake lamp, gauge lamp,

hazard lamp and general or alternator, fuse box which is also from the electrical system.

Содержание T254NC





























































































Результаты поиска

Содержание T254NC

Отзывы:

Похожие инструкции для T254NC

Бренды по названию

Популярные бренды

TYM T254NC, Руководство оператора

Результаты поиска

Содержание T254NC

Отзывы:

Похожие инструкции для T254NC

Бренды по названию

Популярные бренды