Tylo Prime+ 1811, Руководство пользователя

Страница: 7 / 61

Bench (
Box
1):
• Push the bench seat downwards into the back panel with the junction box pointing towards
you.
• Tilt the bench against the back panel as shown below.
• Connect the S-1 electrical connector to the S-1 junction box.
• Fix the cover of the S-1 junction box with 2 Phillips screws.
• Connect the bench valance strip lights to the strip light connection in the connector (Note:
two connections may come out of the floor with some models. You only need to connect
one with this model.)
•
Lay the bench down and push it into the right place.
Front wall panel (
Box
2):
•
Insert the front left glass section into the slot provided.
• (Note: The seal should be in the middle and on the inside
of the sauna.)
• Two adults are required to push the right fixed section
into the front right hand slot.
• The person who is holding the door will have to help
fit the section into the floor and side panel.
• When the section is fixed securely to the floor and the side
panel you are ready for the ceiling section.
Note: All wall panel parts are now connected but not secured.
Note: If additional helpers are not available to hold the glass sections
while two people fix the ceiling section, fix the whole front with
adhesive tape.
Page 7