Tyco ADEMD4B000TV, Руководство пользователя

Страница: 17 / 91

Digital Video Recorder User Manual
14 ESC Same as [ESC] key of front panel
15 Reserved Reserved for future function
16 F1 Reserved for future function
17 Lens control
IRIS, FOCUS ZOOM for lens
control
18 F2 Reserved for future function
Loading the batteries into the remote controller
1. Remove the battery cover.
2. Insert the battery. Please make sure that the polarities (+ and -) are correctly
positioned.
3. Replace the battery cover.
Start to use remote controller
Press [DEV] key, input the DVR device ID (default is “88”, can be changed in “Display”
menu) and then press [ENTER] key.
Stop using remote controller
Press [DEV] key again, the remote controller is disconnected from the DVR. Please note
there is no audible warning given by this unit. You may switch the DVR ID to “255”, thus
the remote controller will be always connected, you don’t have to establish the connect
between the RC and DVR after rebooting the unit.
Switch the DVR off
When IR controller status is on, press [POWER] key for several seconds, the DVR will be
powered off.
If the remote controller is not work properly
z Check batteries polarities.
z Check the batteries capacity.
z Check whether IR sensor is covered.
z Check whether the remote controller has been linked to the DVR.
Please change another remote controller to try again. If the problem still exists,
please contact your dealer for repair or replacement.
17