2
Depending on the network layout and the construction of the cables
the used kit content may be different. Some of the components will be
pre-assembled in the box depending on the selection and the ordering.
The minimum content will be:
•
4 PCs of mounting bolts and plugs for wall mounting
•
The box base
•
Pre installed
-
Universal Mounting System profile.
-
Small fiber routing block with tube holders
-
Tray lid, guiding pin and retainers
-
Velcro strap
-
FAS cap including the Tray wedge
-
Cable strain relief connectors and fixing plate
•
Cable glands
•
Tiewraps
•
The Cover (including 4 preinstalled screws)
•
Installation instruction
3
Installation
3.1
Preparation of box
3.2.1. Drill out the ports to be used ,
Incoming cables
Ports 1-2
Outgoing cable
Ports 4-5
Port 1 and 2 for cables routed to the right tubeholder.
Port 4 and 5 for cables routed to the left tubeholder.
Port 3 can not be used to feed a cable through.
2.2
Kit contents
3.1.1 Unlock the screws and remove the cover.
3.1.2. In case of a box with lock, lift cover and remove the guiding
pins.
3.2
Opening of the cable ports
1
2
3
4
5
