GPS Receiver
A1037-A
1 Introduction
Tyco Electronics’ GPS module A1037-A is a highly integrated GPS receiver module
that can be used as an SMT component. It is capable to receive signals from up to
12 GPS satellites and transferring them into position and timing information that can
be read over a serial port. This new generation of GPS module combines small size
and high-end GPS functionality at low power consumption:
•
Operable at 3.3V / 50mA (typ.) @ 1fix per second
•
Small form factor of 19 x 16.2 mm (0.75” x 0.64”)
•
Cost-effective antenna input
•
Single-sided SMD component, for reflow soldering
•
Tape & reel packaging
The A1037-A GPS receivers are available as off-the-shelf components, 100%
tested and shipped in standard tape-and-reel package.
1.1 Label
The A1037-A label holds the following information:
Figure 1: A1037-A label
V2.0 - 03/07
User’s Manual
Page 7 of 29
