24 Port Ethernet Switch With Optional Fiber Port
Tyco Electronics
Page 12
QOS Control
The switch allows basic prioritization of packets through the switch
using a central dual queue system. Each port can be programmed
to forward all traffic at either low priority or high priority. These
priorities are assigned on a per-port basis and are not dependent
on the QoS or ToS bits within the packet. A typical application of
this would be to allow high priority VoIP traffic on a port to be
forwarded by the switch in preference to traffic from a standard PC
connected on another port.
Figure 11 - QoS Control Screen
This QoS screen is selected from the main menu using the Q
option.
Priority Setting
The priority level can map the selected port to use either the high
or low priority queue. This control is applied on a per-port basis. To
configure the priority setting, select
P
from the QOS Control menu.
The screen below will be displayed.
Figure 12 - QoS Priority menu
