408-8908
SOLISTRAND Flag Terminal Crimping Dies
Rev O
6 of 6
Figure 8
Terminal Dies (Typical)
Dies Bottomed but
Not Under Pressure
GO" Element Must Pass
Completely Through the
Die Closure
NO-G0" Element May Enter
Partially, but Must Not Pass
Completely Through the Die
Closure
6. REPLACEMENT PARTS
Refer to Figure 1 when replacement of a die becomes
necessary, contact your local Tyco Electronics
Representative; call 1–800–526–5142; send a
facsimile of your purchase order to 1–717–986–7605;
or write to:
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS CORPORATION
P. O. BOX 3608
HARRISBURG, PA 17105–3608
7. REVISION SUMMARY
Per EC 0990–0402–04:
S
Initial release of instruction sheet
