manualshive.com logo in svg

TYAN TRINITY KT-A, Руководство пользователя

Поделиться
Скачать
TYAN TRINITY KT-A Скачать руководство пользователя страница 50

http://www.tyan.com

50

Chapter 3

BIOS Configuration

Video Off Option

Selects the power-saving modes during which the monitor goes blank.

Video Off Method

Determines the manner in which the monitor is blanked. The Blank Screen option will
let the system BIOS blank the screen when disabling video. V/H sync+Blank will allow
the system BIOS to turn off the V-SYNC and H-SYNC signals running from the VGA
card to the monitor.

Modem Use IRQ

If Modem Ring Resume is Enabled, it is possible to wake the system by dialing in to it.
This field determines which IRQ will be monitored for the incoming call.

Soft-Off by PWRBTN

When you select Instant Off or Delay 4 Sec., turning the system off with the on/off
button places the system in a very low power usage state, either immediately or after 4
seconds, with only enough circuitry receiving power to detect wake-up event activity.

Wake Up Events

A power management (PM) event awakens the system from, or resets activity timers
for, Suspend mode.

V / H SYNC+Blank

System turns off vertical and horizontal synchronization 
ports and w rites blanks to the video buffer.

DPMS Support

Select this option if your monitor supports the Display 
Pow er Management Signaling (DPMS) standard of the 
Video Electronics Standards Association (VESA). Use the 
softw are supplied for your video subsystem to select 
video pow er management values.

Blank Screen

System only w rites blanks to the video buffer.

Alw ays On

Monitor remains on during pow er-saving modes.

Suspend --> Off

Monitor blanked w hen system enters suspend 
mode.

All Modes --> Off

Monitor blanked w hen system enters any pow er-
saving mode.

Содержание TRINITY KT-A




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды