background image

 

i

PREFACE

Copyright

This publication, including all photographs, illustrations, and soft-
ware, is protected under international copyright laws, with all rights 
reserved. Neither this manual, nor any material contained herein, 
may be reproduced without written consent of the manufacturer-.

Copyright 2006

Version 1.0

Disclaimer

Information contained in this document is furnished by TYAN Com-
puter Corporation and has been reviewed for accuracy and reliability 
prior to printing. TYAN assumes no liability whatsoever, and dis-
claims any express or implied warranty, relating to sale and/or use of 
TYAN products including liability or warranties relating to fitness for 
a particular purpose or merchantability. TYAN retains the right to 
make changes to product descriptions and/or specifications at any 
time, without notice. In no event will TYAN be held liable for any 
direct or indirect, incidental or consequential damage, loss of use, 
loss of data or other malady resulting from errors or inaccuracies of 
information contained in this document. 

Trademark Recognition

All registered and unregistered trademarks and company names 
contained in this manual are property of their respective owners 
including, but not limited to the following. 

TYAN and Transport TA26-B3992 are trademarks of TYAN Com-
puter Corporation. 

AMD, Opteron, and combinations thereof are trademarks of AMD 
Corporation.

AMI, AMIBIOS, and combinations thereof are trademarks of AMI 
Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation. 

Winbond is a trademark of Winbond Electronics Corporation. 

Portable Document Format (PDF) is a trademark of Adobe Corpora-
tion. 

Содержание Transport TA26 B3992









































































Отзывы: