TYAN Tomcat K8S S2850 Скачать руководство пользователя | Manualshive

Страница: 60 / 60

background image

60

http://www.TYAN.com

Notice for the USA

Compliance Information Statement (Declaration of Conformity Procedure) DoC
FCC Part 15: This device complies with part 15 of the FCC Rules

Operation is subject to the following conditions:

This device may not cause harmful interference, and
This device must accept any interference received including interference that may cause undesired
operation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try one or more
of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Plug the equipment into an outlet on a circuit different from that of the receiver.
Consult the dealer on an experienced radio/television technician for help.

Notice for Canada
This apparatus complies with the Class B limits for radio interference as specified in the Canadian
Department of Communications Radio Interference Regulations. (Cet appareil est conforme aux
norms de Classe B d’interference radio tel que specifie par le Ministere Canadien des
Communications dans les reglements d’ineteference radio.)

Notice for Europe (CE Mark)
This product is in conformity with the Council Directive 89/336/EEC,
92/31/EEC (EMC).

CAUTION: Lithium battery included with this board. Do not puncture, mutilate, or dispose of battery
in fire. Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by manufacturer. Dispose of used battery according to manufacturer
instructions and in accordance with your local regulations.

Document #: D1535-100

«
...
58
59
60

Содержание Tomcat K8S S2850





























































Отзывы:

Нет отзывов

Похожие инструкции для Tomcat K8S S2850

Бренд: Acer Страницы: 15

Бренд: Acer Страницы: 12

Бренд: Aaeon Страницы: 100

Бренд: Aaeon Страницы: 120

Бренд: Aaeon Страницы: 116

Бренд: Aaeon Страницы: 119

Бренд: Aaeon Страницы: 111

Бренд: Aaeon Страницы: 106

Бренд: Aaeon Страницы: 48

Бренд: Aaeon Страницы: 44

Бренд: IEI Technology Страницы: 234

Бренд: Avalue Technology Страницы: 75

CrossLink LIF-MD6000 Master Link Board - Revision C

Бренд: Lattice Страницы: 40

Бренд: MSI Страницы: 22

Бренд: Humandata Страницы: 10

Бренд: Newport Страницы: 30

Бренд: ASROCK Страницы: 200

Бренд: Gigabyte Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды