TYAN Tomcat K8E-SLI S2866, Руководство пользователя

Страница: 69 / 82

http://www.tyan.com
69
3.14 Load Fail-Safe/Optimized Defaults
When you press <Enter> on this item you get a confirmation dialog box with a
message similar to:
Load Fail-Safe Defaults (Y/N)? N
Pressing ‘Y’ loads the BIOS default values for the most stable, minimal-
performance system operations.
When you press <Enter> on this item you get a confirmation dialog box with a
message similar to:
Load Optimized Defaults (Y/N)? N
Pressing ‘Y’ loads the default values that are factory settings for optimal system
performance operations.
3.15 Supervisor/User Password Setting
You can set either a supervisor or a user password, or both of them . The
differences are:
Set Supervisor Password: can enter and change the options of the setup
menus.
Set User Password:
Can enter but does not have permission to change any
options.
When you select this function, the following message will appear at the center
of the screen to assist you in creating a password.
Enter Password
Type the password, up to eight characters in length, and press <Enter>. The
password typed now will clear any previously entered password from CMOS
memory. You will be asked to confirm the password. Type the password again
and press <Enter>. You may also press <Esc> to abort the selection and not
enter a password.
To disable a password, just press <Enter> when you are prompted to enter the
password. A message will confirm the password will be disabled. Once the
password is disabled, the system will boot and you can enter Setup freely.
When a password has been enabled, you will be prompted to enter it every time
you try to enter Setup. This prevents an unauthorized person from changing
any part of your system configuration.