TYAN TN76-B7102 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 180

TYAN TN76-B7102 Скачать руководство пользователя страница 4

4

http://www.tyan.com

FCC Declaration

Notice for the USA

Compliance Information Statement (Declaration of
Conformity Procedure) DoC

FCC Part 15: This

device complies with part 15 of the FCC Rules

This device complies with Part 15 of the FCC Rules. Operation is subject to
the following conditions:



This device must not cause harmful interference.



This device must accept any interference received, including
interference that may cause undesirable operation.

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.

Notice for Canada

This Class A digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la Classe A est conforme à la norme NMB-003 du
Canada.

Notice for Europe (CE Mark)

This product is in conformity with the Council
Directive 2014/30/EU.

CAUTION:

Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. There will be danger of explosion if
battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by manufacturer. Dispose of used battery according to
manufacturer instructions and in accordance with your local regulations.

«
...
2
3
4
5
6
...
»

Содержание TN76-B7102





















































































































































































Отзывы:

Нет отзывов