TYAN TN76-B7102 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 180

TYAN TN76-B7102 Скачать руководство пользователя страница 34

http://www.tyan.com

34

2.2 Rack Mounting

CAUTION:

Please note that the following illustrations are based on a

TN76-B7102 barebone which may not look exactly like the rackmount
server you purchased. Therefore, the illustrations should be held for
your reference only.

After installing the necessary components, the TYAN TN76-B7102 can be mounted
in a rack using the supplied rack mounting kit.

2.2.1 Installing the Server in a Rack

Follow these instructions to mount the TYAN TN76-B7102 into an industry standard
19" rack.

NOTE

:

Before mounting the TYAN TN76-B7102 in a rack, ensure that all internal

components have been installed and that the unit has been fully tested. However, to
make the installation easier, we suggest that you remove all HDD trays before you
insert the chassis into the rack.

2.2.2 Installing the inner Rails to the Chassis

1. Release and detach the inner rail from the sliding rail.

2. Align the inner sliding rail on one side of the server.

3. Pull the inner sliding rail forward to secure it to the chassis.

«
...
32
33
34
35
36
...
»

Содержание TN76-B7102





















































































































































































Отзывы:

Нет отзывов