TYAN TN70-B7066 Скачать руководство пользователя страница 9

http://www.tyan.com

 

Equipment Power Cords 

· 

Use only the power cords and power supply units provided with your 

system. The system might have one or more power cords. 

·

  Plug the power cord into a grounded (earthed) electrical outlet that is 

easily accessible at all times. 

·

  In all European electrical environments, you must ground the 

Green/Yellow tab on the power cord. If you do not ground the 
Green/Yellow tab, it can cause an electrical shock due to high leakage 
currents. 

·

 

Do not place objects on AC power cords or cables. Arrange them so 

that no one might accidentally step on or trip over them. 

·

Do not pull on a cord or cable. When unplugging from the electrical 

outlet, grasp the cord by the plug. 

·

  To reduce the risk of electrical shock, disconnect all power cords before 

servicing the appliance. 

 

Equipment Batteries

 

· 

The system battery contains lithium manganese dioxide. If the battery 

pack is not handled properly, there is risk of fire and burns. 

·

  Do not disassemble, crush, puncture, short external contacts, or 

dispose of the battery in fire or water. 

·

  Do not expose the battery to temperatures higher than 60°C (140°F). 

·

  The system battery is not replaceable. If the battery is replaced by an 

incorrect type, there is danger of explosion. Replace the battery only with a 
spare designated for your product. 

·

  Do not attempt to recharge the battery. 

·

  Dispose of used batteries according to the instructions of the 

manufacturer. Do not dispose of batteries with the general household 
waste. To forward them to recycling or proper disposal, use the public 

collection system or return them to TYAN, your authorized TYAN partner, 
or their agents. 

 
 

Содержание TN70-B7066




















































































Отзывы: