TYAN TN70-B7066, Руководство сервисного инженера

Страница: 7 / 83

7
http://www.tyan.com
General Precautions
·
Follow all caution and warning instructions marked on the equipment
and explained in the accompanying equipment documentation.
Machine Room Environment
· Make sure that the area in which you install the system is properly
ventilated and climate-controlled.
·
Ensure that the voltage and frequency of your power source match the
voltage and frequency inscribed on the electrical rating label of the
equipment.
·
Do not install the system in or near a plenum, air duct, radiator, or heat
register.
·
Never use the product in a wet location.
Equipment Chassis
·
Do not block or cover the openings to the system.
·
Never push objects of any kind through openings in the equipment.
Dangerous voltages might be present.
·
Conductive foreign objects can produce a short circuit and cause fire,
electric shock, or damage to your equipment.
·
Lift equipment using both hands and with your knees bent.
Equipment Racks
To avoid injury or damage to the equipment:
· Observe local occupational health and safety requirements and
guidelines for manual materials handling.
·
Do not attempt to move a rack by yourself; a minimum of two people
are needed to move a rack.
·
Do not attempt to move a fully loaded rack. Remove equipment from
the rack before moving it.
·
Do not attempt to move a rack on an incline that is greater than 10
degrees from the horizontal.