TYAN S7120, Руководство пользователя

Страница: 30 / 172

http://www.tyan.com
30
2.8 Installing the Memory
Before installing memory, ensure that the memory you have is compatible with the
motherboard and processor. Check the TYAN Web site at
http:// www.tyan.com for
details of the type of memory recommended for your motherboard.
Before installing memory, ensure that the memory you have is compatible with the
motherboard and processor. Check the TYAN Web site at
http://www.tyan.com for
details of the type of memory recommended for your motherboard.

This platform supports (8)+(8) DDR4 RDIMM/LRDIMM 3200/2933/2666/2400.

1.2V DDR4 DIMMs are supported.

All installed memory will be automatically detected. No jumpers or settings
need to be changed for memory detection.

All memory must be of the same type and density. Different memory types
can NOT be mixed and matched on the same motherboard.
General Population Requirements
DIMM Mixing Rules:
• All DIMMs must be either all DDR4 DIMMs and/or DDR4 and Barlow Pass
DIMMs.
• Mixing of RDIMMs and LRDIMMs is not allowed in the same channel, across
different channels, and across different sockets.
• Mixing of Barlow Pass DIMMs with RDIMMs is supported in Whitley platform.
• Mixing of Barlow Pass DIMMs with LRDIMMs is supported in Whitley
platform.
• Mixing of DDR4 or Barlow Pass operating frequencies is not recommended.
Key Parameters for DIMM Configuration
Parameter Possible Values
# of Channels 1,2,3,4,5,6,7,8
# of DIMMs Populated per channel 1DPC
DIMM Type
RDIMM (w/ECC), LRDIMM
and Barlow Pass DIMM
DIMM construction

non-3DS RDIMM Raw Cards: B (2Rx4), C (1Rx4), D (1Rx8),
E (2Rx8)

non-3DS LRDIMM Raw Cards: D/E (4Rx4)

Barlow Pass DIMM