TYAN S7065, Руководство пользователя

Страница: 77 / 118

http://www.TYAN.com
77
Stop Bits
Stop bits indicate the end of a serial data packet. (A start bit indicates the
beginning). The standard setting is 1 stop bit.1 communication with slow devices
may require more than 1.
[1]
/ [2]
Default is [1]
Flow Control
Flow control can prevent data loss from buffer overflow. When sending data, If the
receiving buffers are full, a ‘stop’ signal can be sent to stop the data flow. Once the
buffers are empty, a ‘start’ signal can be sent to restart the flow. Hardware flow
control uses two wires to send start/stop signal.
[None] / [Hardware RTS/CTS]
Default is [None]
VT-UTF8 Combo Key Support
Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals.
[Enabled] / [Disabled]
Default is [Enabled]
Recorder Mode
With this mode enabled only text will be sent. This is to capture Terminal data.
[Disabled] / [Enabled]
Default is [Disabled]
Resolution 100x31
Enable or disable extended terminal resolution.
[Disabled] / [Enabled]
Default is [Disabled]
Legacy OS Redirection Resolution
On Legacy OS, the number of rows and columns supported redirection.
[80x24] / [80x25]
Default is [80x24]
Putty KeyPad
Select FunctionKey and KeyPad on Putty.
[VT100] / [LINUX] / [XTERMR6] / [SCO] / [ESCN] / [VT400]
Default is [VT100]