TYAN S7063, Руководство пользователя

Страница: 24 / 118

http://www.tyan.com
24
J2: BIOS Recovery Mode Jumper
1 2 3
NC BIOS_RCVR # GND
Pin 1-2 Closed: Normal Mode (
Default)
Pin 2-3 Closed: BIOS Recovery Mode
J3: Clear CMOS Jumper
Normal (
Default
)
Clear CMOS
You can reset the CMOS settings by using this jumper. This can be
useful if you have forgotten your system/setup password, or need to
clear the system BIOS setting.
Pin Signal Pin Signal
1 VBAT 2 RTCRST#
3 GND
1. Power off system and disconnect power connectors from the
motherboard.
2. Remove the jumper from Pin_1 and Pin_2 (Default setting).
3. Move the jumper cap to close Pin_2 and Pin_3 for several seconds
to Clear CMOS.
4. Put jumper cap back to Pin_1 and Pin_2 (Default setting).
5. Reconnect power connectors to the motherboard and power on
system.
J38: SPI Write Protect Header
1 2 3
GPIO_WP# SPI_WP # GND
Pin 1-2 Closed: Normal Mode (
Default)
Pin 2-3 Closed: SPI Write Protect Mode
J75: LSI 2308 Enable/Disable Jumper
1 2 3
NC RESET GND
Pin 1-2 Closed: Enable (
Default)
Pin 2-3 Closed: Disable