TYAN S5550, Руководство пользователя

Страница: 29 / 142

http://www.tyan.com
29
J33: Chassis Intrusion Header
Signal Pin Pin Signal
PCH_INTRUDER_N 1 2 GND
J65: LAN3_LED
Signal Pin Pin Signal
VCC 3.3V 1 2 LAN3_LED_N
J66: LAN4_LED
Signal Pin Pin Signal
VCC 3.3V 1 2 LAN4_LED_N
J84: Front Audio Header
Signal Pin Pin Signal
MIC2-L 1 2 GND
MIC2-R 3 4 DETECT
LINE2-R 5 6 MIC2-JD
FIO_SENSE 7 8 KEY-Pin
LINE2-L 9 10 LINE2-JD
J26: BMC Debug Header
3 1
Pin Signal Name
1 UART_TXD
2 GND
3 UART_RXD
J12: Clear CMOS Jumper
3 1
Normal ( Default )
You can reset the CMOS settings by using this jumper. This can be
useful if you have forgotten your system/setup password, or need to
clear the system BIOS setting.
1. Power off system and disconnect power connectors from the
motherboard.
2. Remove the jumper from Pin_2 and Pin_3 (Default setting).
3. Move the jumper cap to close Pin_1 and Pin_2 for several seconds
to Clear CMOS.
4. Put jumper cap back to Pin_2 and Pin_3 (Default setting).
5. Reconnect power connectors to the motherboard and power on
system.
1 3
Clear TRC