TYAN S5535, Краткое руководство пользователя

Страница: 20 / 100

http://www.tyan.com
20
DBG_HD1: TYAN Module Header
Signal Pin Pin Signal
VCC3 1 2 LPC_LFRAME_N
LAD0 3 4 KEY
LAD1 5 6 LPC_RST_N
LAD2 7 8 GND
LAD3 9 10 33M_CLK
SERIRQ 11 12 GND
PRESENT_N 13 14 3V3_VSB
GPIO1 15 16 GPIO2
J27: Vertical Type-A USB Connector
Signal Pin Pin Signal
VCC 1 2 USB_DN
USB_DP 3 4 GND
J31: PSMI Connector
Pin 1 2 3 4 5
Signal PSMI_SCL PSMI_SDA RSVD GND VCC
J4: Clear CMOS Jumper
3
1
Normal ( Default )
1 3
Clear CMOS
You can reset the CMOS settings by using this jumper. This can be
useful if you have forgotten your system/setup password, or need to
clear the system BIOS setting.
1. Power off system and disconnect power connectors from the
motherboard.
2. Remove the jumper from Pin_2 and Pin_3 (Default setting).
3. Move the jumper cap to close Pin_1 and Pin_2 for several seconds
to Clear CMOS.
4. Put jumper cap back to Pin_2 and Pin_3 (Default setting).
5. Reconnect power connectors to the motherboard and power on
system.