WWW.TYAN.COM
51
AGP Chipset Configuration Sub-Menu
This menu allows the user to configure AGP transfer settings and the
HyperTransport settings of the AMD-8151.These options have been configured
for a balance of performance and stability. Changing these options is not
recommended. Use the up and down arrow (
á
/
â
) keys to select an item. Use the
Plus and Minus (+/-) keys to change the value of the selected option.
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security
Chipset
Power
Exit
AGP Chipset Configuration
AGP Transfer Rate
AGP Aperture
FW Enable
P Data Drive Strength
N Data Drive Strength
P Strobe Drive Strength
N Strobe Drive Strength
[1x 2x 4x 8x]
[128MB ]
[Enable]
[Auto]
[Auto]
[Auto]
[Auto]
Use [ENTER], [TAB]
or [SHIFT_TAB] to
select a field
Use [+] or [ -] to
configure system time.
+/- Change Field
Tab Select Field
F1 Help
F10 Save and Exit
ESC Exit
Feature
Option
Description
4x 8x
AGP Transfer Rate
4x
Change this option only if the AGP
card you are using requires the
change.
128MB
AGP Aperture
32MB~2048MB
Allows an range of system memory to
be used by the AGP card
Enabled
FW Enable
Disabled
Allows user to disable AGP Fastwrite
support.
Auto
Data
CData
P Data Drive
Strength
CalComp -Data
Auto uses hardware compensation
values. Other values add to or
subtract from hardware generated
value. Recommended setting is Auto.
Auto
Data
CData
P Strobe Drive
Strength
CalComp -Data
Auto uses hardware compensation
values. Other values add to or
subtract from hardware generated
value. Recommended setting is Auto.
Auto
Data
CData
N Strobe Drive
Strength
CalComp -Data
Auto uses hardware compensation
values. Other values add to or
subtract from hardware generated
value. Recommended setting is Auto.
