http://www.TYAN.com
27
2.32 – Heatsink Installation Procedures
Type A: CAM LEVER (TYPE) INSTALLATION
1. After placing backplate and interface
material under motherboard place heatsink
retention frame on top of motherboard.
Align plastic retention bracket screw hole
with CPU back-plate standoffs.
Tighten screws to secure plastic retention
bracket. Repeat for on other side.
DO NOT OVER TIGHTEN.
2. After tightening screws secure metal clip
to plastic retention bracket center tab.
Repeat for on other side of heatsink.
3. After securing metal clip to plastic
retention bracket center tab, push down on
plastic clip to lock plastic clip to side tab.
