TYAN S2882, Руководство пользователя

Страница: 2 / 79

http://www.TYAN.com
2
Table of Contents
Before you begin… Page 4
Chapter 1: Introduction
Congratulations Page 5
Hardware Specifications Page 5
Software Specifications Page 6
Chapter 2: Board Installation
2.00 Board Image Page 8
2.01 Block Diagram Page 9
2.02 Board Parts, Jumpers and Connectors Page 10
2.03 Gigabit LAN_1 Front Panel LED Header (J1) and Gigabit LAN_2
Front Panel LED Header (J2) Page 12
2.04 Front Panel Connector (J6) Page 12
2.05 Clear CMOS Jumper (J8) Page 13
2.06 SMBus_0 Connector (J11) Page 13
2.07 USB Connector Headers (J12) Page 14
2.08 10/100 LAN front Panel LED Header (J17) Page 14
2.09 Chassis Intrusion Connector (J19) Page 15
2.10 ZCR Connector (J22) Page 15
2.11 COM2 Header (J23) Page 16
2.12 PCI-X Bridge B (PCI 1 & PCI 2) PCI-X Speed Select Jumper (J24 /
J39) Page 16
2.13 PCI-X Bridge A (PCI 3 & PCI 4) force PCI Mode Jumper (J41) Page 17
2.14 Keylock Enable/Disable Jumper (J42) Page 17
2.15 PCI-X Bridge A (PCI 3 & PCI 4 & SCSI7902 & BCM5704) PCI-X
Speed Select Jumper (J43) Page 18
2.16 SMDC Connector (J45) Page 18
2.17 Onboard VGA Enable / Disable Jumper (J46) Page 19
2.18 Onboard Gigabit Ethernet Enable / Disable Jumper (J52) Page 19
2.19 Onboard 10/100 Ethernet Enable / Disable Jumper (J60) Page 20
2.20 ZCR Card Connector Select Jumper (J61) Page 20
2.21 CPU_1 Fan Connector (P1_FAN) (J5) Page 21
2.22 CPU_2 Fan Connector (P2_FAN) (J47) Page 21
2.23 FAN 1 Chassis Fan Connector (J44) Page 22
2.24 FAN 2 Chassis Fan Connector (J48) Page 22
2.25 FAN 3 Chassis Fan Connector (J4) Page 23
2.26 FAN 4 Chassis Fan Connector (J9) Page 23
2.27 FAN 5 Chassis Fan Connector (J3) Page 24
2.28 OEM Reserved Connectors and Jumpers Page 24
2.29 Installing the Processor(s) Page 25
2.30 Heatsink Retention Frame Installation Page 25
2.31 Thermal Interface Material Page 26
2.32 Heatsink Installation Procedures Page 27
2.33 Finishing Installing Heatsink Page 28
2.34 Tips on Installing Motherboard in Chassis Page 29
2.35 Installing the Memory Page 30
2.36 Attaching Drive Cables Page 32
2.37 Installing Add-In Cards Page 34
2.38 PCI Riser Cards Supported on S2882 K8S Page 35
2.39 Connecting External Devices Page 35
2.40 Installing the Power Supply Page 36
2.41 Finishing Up Page 36