TYAN S2707 Скачать руководство пользователя страница 32

Страница: 32 / 40

http://www.tyan.com

3.5 – Power

ACPI Aware O/S

[Yes]

Dependent on usage of ACPI-capable OS.

Instant ON/OFF

[Disabled]

Dependent on us age of ACPI-capable OS.

3.6 – Boot

Options related to boot devices can be altered through the following.

Boot Device Priority

1st Boot Device
2nd Boot Device
3rd Boot Device

Settings for boot priority. These can be
customized depending on your
preference.

Hard Disk Drives

Specifies the boot sequence for hard drive booting. This option
will show all storage devices.

Removable Devices

Specifies the boot sequence for removable drive booting. This
option will show all removable devices.

ATAPI CDROM Drives

Specifies the boot sequence for CD-ROM drive booting. This
option will show all CD-ROM devices.

3.7 – Security

Options related system security can be altered through the following.

Change Supervisor
Password

Changes system password.

Change User Password

Changes boot password.

Clear User Password

Clears boot password.

Boot Sector Virus
Protection

[Disabled]

Toggles protection of boot sector on the hard
drive from being modified.

3.8 – Exit

Options related exiting and saving can be done using the following.

Exit Saving Changes

Exit and save options.

Exist Discarding Changes

Exit but don’t save options.

Load Optimal Defaults

Loads the BIOS setup with default settings.

Load Failsafe Defaults

Loads the BIOS setup with more conservative settings

Discard Changes

Discards any changes made.

Содержание S2707









































Результаты поиска

Содержание S2707

Отзывы:

Похожие инструкции для S2707

Бренды по названию

Популярные бренды

TYAN S2707, Руководство пользователя

Результаты поиска

Содержание S2707

Отзывы:

Похожие инструкции для S2707

Бренды по названию

Популярные бренды